Tips for a proper use of our discs
The serial number on discs boxes refers to ow internal reference. Jhanks to if we are
identify row materials used and production phases. For any
information/request on our products
always refer to the above mentioned code
STOCKING - You shell verify that products wereproperty handled during transport operations
(intact packaging). Products shall be stocked in a dry place and protected against intense cold.
Discs shall be used on rotation, according to stocking expiry dates.
DISCS CHOICE - Discs must be chosen according to the kind of material you are going to use,
the machining and the operating machine. Jhe operating machine shaft RPM shall never exceed
the speed rate written on the disc label.
CHCK - Carefully check grinding wheek. If they are damaged, do not use them because they
can severely endager operators. • The operating machine shaft RPM bearing the wheel shall
never exceed the speed rate written on the wheel label or on the wheel itself. - Before cutting or
grinding, the wheel protective cover shall always be in its proper place and firmly fixed. - Jhe
machine protective cover shall be fixed in such a way as to protect the operator.
The grinding wheel shall only be mounted on specific machines. Flange shall be in good operating conditions. Use gaskets if supplied together with the grinding wheels. Hever force grinding
wheels on to the machine during assembly operations. Grind and cut only those materials which
the grinding wheel was expressly built for. Carry out avoid test of the grinding wheel on the proper machine, before using it, without pressure. Before starting any machining operation, carefully fix the workpieces.
Instructions for use
Culling wheels are built to stand radial stresses only (perpendicular to the workpiece). Any other
kind of stress shall be avoid, above all normal ones (side) with respect to the plane.
Always wear an eyes protective cover. Other safety measures are necessary according to the
kind of operation, such as: sound-proofing hoods and caps, gloves, dust mask, feather overall or
protective workwear, hat, protective footwear.
Portable machine shall always be used in such a way as to prevent sparks from
falling on any
inflammable materials or reaching the operator. After turning off the machine,
wait for the grinding wheel to stop completely, before placing the machine on a work
bench or put in on to the